How to Use Wireshark

Wireshark are types of free packet sniffer computers applications. They are used for troubleshooting the network, analysis, education and even developing communications and software protocol. It was then given a different name that was known as Ethereal in 2006 because of problems in trademark.



When working with network applications, it is important to have the Wireshark. Apart from functioning both on Linux or Windows platforms, it is very efficient. Even though there are extremely powerful features on a number of commercial items, Wireshark has always had amazing plugging aiming VoIP space.

Confining Frames

Previous analyzing network frames that cross the actual network helps in capturing other network applications. The analysis will always take place in form of real time whenever Wireshark runs on the probes but additionally captures frames, stock them up in files and later on runs the analysis. Because SIP protocol is distributed naturally, assembling voice traffic could be challenging. However, remedies are there to counteract these. To pull together frames, people could directly utilize tcpdump, accessible on many Unixes and directly operate from command lines.

Two Proposed Approaches

When the tools to be used have been selected, two approaches can be used. The first one would be using mirror ports on switches; the option will require utilization of network switches having port mirroring features. The other option would be directly using proxy servers, which deals with capturing traffic on UNIX servers that host the proxy. This will require users to directly run the tcpdump command from servers, which is impossible.

Real Procedures

  • Installing Ethernal/ Wireshark
  • The minute users download Wireshark; they need to run the executable. Installation procedure is trouble free considering the fact that specifically two packages are involved; WinPCAP and Ethereal. These packages are all classified using similar installation files.
  • The next step would be ensuring that users run the most important Ethernal interface. To get hold of the frames, subscribers need to go to the menu labeled ‘capture’ then goon to the ‘options’.
  • Users should then pick on the interfaces they prefer best.
  • By default, an allocation for the collection of data is set so that it gets to 1MB. People have the freedom of fitting it to what they like best.
  • In their licentious modes, users need to facilitate the capture of packets.
  • As a matter of fact, the alternatives allow network adapters to intercept, after reading the entire traffic networks.
  • Leave capture filters empty.
  • Click on ‘start’ on the menu.

When Asterisk is being used, Linux will be the mainly used operating platform. Moreover, it supports tcpdump in a good number of distribution strategies, which is directly installed from the package.

Author bio:

Joseph is a free lancer writer and content builder of and